UN-600/30H
Optimized large volume production of automotive components Compact, high-speed horizontal machining center UN-600/30H
- Considerably smaller machine with when compared to other machines with same machining area thanks to the compound X-axis, half of the X-axis stroke is on the machine table, the other half is on the machine column
- High-speed cutting
Feedrate （Xaxes ［X,Uaxes］/ Y,Zaxes ） 120 m/min［ 60 m/min］ / 60 m/min
Acceleration （Xaxes［ X,Uaxes］ / Yaxes / Zaxes ） 2.0 G［ 1.0 G］ / 1.5 G / 2.0 G
- The ball screw cooling system and the standard equipment chiller unit which is used to control the temperature of the spindle motor ensure consistent machining accuracy.
- Prevention of problems caused by the accumulation of machined chips
- Items requiring frequent access, such as the lubrication and air inlets, are in one central location for convenient maintenance to minimize machine down time
- Intermittent operation of hydraulic unit with accumulator results in lower electrical power consumption
Machine Specifications
| Standard Machine | Values | |
|---|---|---|
| CAPACITY | Maximum workpiece diameter | 600 mm |
| Maximum workpiece height | 500 mm | |
| X-axis travel (column right and left) | 510 mm | |
| Y-axis travel (spindle up and down) | 400 mm | |
| Z-axis travel (table back and forth) | 380 mm | |
| SPINDLE (standard) | Spindle taper hole | 7/24 taper No30 |
| Spindle speed maximum | 20,000 min-¹ | |
| Main motor (10 minute rating) | 18.5 kW | |
| FEED RATES | Rapid traverse (X/Y/Z) | 120/60/60 m/min |
| TABLE & PALLET | Pallet width | 400 mm |
| Pallet length | 400 mm | |
| ATC TOOL MAGAZINE | No. of tool pockets (standard) | 20 |
| Tool shank | MAS BT-30 | |
| MACHINE SIZE | Width | 990 mm |
| Length | 3,265 mm | |