VARIAXIS i-1050T
High-accuracy, 5-axis simultaneous Vertical Machining Center plus Turning Designed for Large Workpieces
VARIAXIS i-1050T
- Rigid #50 taper spindle plus turning capability completes the machining of complex workpieces in a single machine setup
- Large workpiece capacity – table size:Φ1050 mm, maximum workpiece size: Φ1250 mm × 900 mm, maximum table load: 2000 kg
- The tilting/rotary table is rigidly supported on both ends by the trunnion unit. High-speed, high-accuracy machining is ensured thanks to dual roller gear cam on the A-axis and the direct drive motor on the C-axis
- Can be integrated into a FMS with horizontal machining centers to realize exceptional versatility and productivity
Machine Specifications
| Standard Machine | Values | |
|---|---|---|
| CAPACITY | Maximum workpiece diameter | 1,250 mm |
| Maximum workpiece height | 900 mm | |
| X-axis stroke (saddle right/left movement) | 1,200 mm | |
| Y-axis stroke (column back/forth movement) | 1,385 mm | |
| Z-axis stroke (spindle up/down movement) | 900 mm | |
| A-axis (table tilt) travel amount/indexing 0.0001° | -130° to +30° | |
| C-axis (table rotation) travel amount/indexing 0.0001° | 360º | |
| SPINDLE | Spindle speed maximum (standard spec.) | 10,000 min-¹ |
| FEED RATES | Rapid traverse rate (X/Y/Z) | 40 m/min. |
| Rapid traverse rate (A/C) | A: 5400°/min. C: 10800°/min. | |
| TURNING TABLE | Turning table maximum speed (standard spec.) | 500 min-¹ |
| ATC & TOOL MAGAZINE | Tool storage capacity (standard) | 30 |
| Tool storage capacity (option) | 40/ 80/ 120 | |
| Tool shank type | MAS BT 50 / CAT No. 50 | |