INTEGREX i-200H ST
Next generation multi-tasking machines
- Thanks to flat design of the front, the INTEGREX i-H series considerably improves peripheral equipment accessibility such as a robot and raw material stocker.
- Wide variety of turning and milling spindle specifications available
- New MAZATROL SmoothAi CNC system
Lower Turret
Thanks to balance cutting with the milling spindle and lower turret (simultaneous machining with two tools), productivity can be increased.
Lower turret standard specifications
12 position drum turret for expanded machining
|
Lower turret with rotary tools < option >
The lower turret is optionally available with rotary tools.
Milling can be performed simultaneously by the upper and lower turrets for improved productivity.
|
Automation
Bar feeder
Bar feeders can be used by the INTEGREX i-H series.
A bar feed interface is available for most of the widely used systems. Optional bar feeder scheduling for high-mix, small lot size production and set production is available.
INTEGREX i-450H ST shown
TA (TURN ASSIST)
The TURN ASSIST robot system does not require complicated robot teaching.
Thanks to the setup software, loading of workpieces on the stocker and robot movement are efficiently performed.
INTEGREX i-450H ST shown
Gantry Loader system
Gantry Loader(GL) features a compact design, lowering machine height.
Its unique design also reduces loading / unloading time.
The part conveyor can be installed on either left or right sides of the machine and can be integrated with multiple machines.
INTEGREX i-200H ST shown
Mazak AUTO FLEX CELL
The robot system can perform high-mix, low-volume production by a floor mounted robot.
INTEGREX i-450H ST shown
Next generation MAZATROL Smooth CNC system
Machine Specifications
| 850 mm Bed (Universal) | Values | |
|---|---|---|
| CAPACITY | Chuck size main spindle | 8 " |
| Chuck size secondary spindle | 8 " | |
| Maximum machining diameter (upper turret) | 600 mm | |
| Maximum machining diameter (lower turret) | 400 mm | |
| Bar work capability main spindle (dependent on chuck system) | 65 mm | |
| Bar work capability secondary spindle | 65 mm | |
| MAIN SPINDLE | Rotating speed maximum | 5,000 min-¹ |
| Motor output (40% ED rating) | 22.0 kW | |
| SECONDARY SPINDLE | Rotating speed maximum | 5,000 min-¹ |
| Motor output (40% ED rating) | 22.0 kW | |
| MILLING HEAD | Milling spindle speed maximum | 12,000 min-¹ |
| LOWER TURRET | Number of tools mounted | 12 |
| FEED AXES | Movement stroke X | 535 mm |
| Movement stroke Z | 900 mm | |
| Movement stroke Y | 210 mm | |
| Movement stroke B | 240° (-30° ~ +210°) | |
| Movement stroke X2 | 210 mm | |
| Movement stroke Z2 | 900 mm | |
| Movement stroke W | 900 mm | |
| AUTO TOOL CHANGER & MAGAZINE | Tool storage per magazine | 38 |