FT-150 FIBER
High-productivity Tube Fiber Laser cutting machine for small and medium tubes
The FT-150 FIBER is designed for maximum productivity and high-speed cutting of small and medium diameter tubes.
Exceptional productivity results from the combination of the laser machine’s fiber resonator and the capacity to perform multiple processes including cutting, drilling, and tapping, which leads to significantly reduced in-process times.
Productivity is further improved due to its large capacity bundle loader, which can automatically load raw material weighing up to four tonnes, to enable continuous operation over extended periods.
Mazak’s proprietary laser cutting head includes an additional U-axis which facilitates ultra-high-speed cutting, as well as a B-axis that enables accurate bevel cutting.
Equipped with the state-of-the-art MAZATROL SmoothTube CNC control with new Graphical User Interface and the Human Machine Interface enable effortlessly program and easy production scheduling.
Max. material length for loading |
6500mm (8000mm option) |
Max. loading capacity | 150kg (180kg option) per single tube |
Max. bundle loader capacity | 4 tons |
Max. material length for unloading |
3000mm (4500 option) in parts |
Key features
- The cutting head with B-axis can process a broader range of materials at any desired angle
- Additional U-axis facilitates ultra-high-speed cutting
- Run multiple processes in one machine, from 3D cutting to tapping, when equipped with the optional tapping unit
- Low running cost thanks to fiber technology
- Equipped with the state-of-the-art MAZATROL SmoothTube CNC control
- Available in 3 kW Fiber laser resonator configuration
Machine Specifications
3.0 kW Laser | Values | |
---|---|---|
Maximum machining dimensions | Round pipe | Ф20 to Ф 152.4mm |
Square pipe | 20 x 20 to 125 x 125 | |
Min. length of remaining material | 130 mm | |
Height of chuck center (mm) | 1,100 mm | |
Axis Travel | X-axis | 7700mm(6.5m) 9425mm(8m) |
U-axis | 80 | |
Y-axis | 1,200 mm | |
Z-axis | 205 mm | |
B-axis | +- 45deg/min | |
C-axis | +-99999.999deg/min | |
Rapid traverse | X-axis | 150m/min |
Y-axis | 65 m/min | |
Z-axis | 65 m/min | |
U-axis | 65m/min | |
B-axis | 19200deg/min | |
C-axis | 54000deg/min | |
Machine Specification | Axis Drive System | Rack&pinion (X,U-axis), Ball screw(Y,Z-axis) |
Positioning accuracy (mm) | +-0.05/500mm (X,U-axis), '+-0.001/200mm(Y,Z-axis) | |
Repeatability | +-0.01mm (X,U-axis), +-0.01mm(Y,Z-axis), +-0.01deg(B-axis), | |
Cutting head | 3D torch | |
Profiling unit | Non-contact type | |
Lighting Unit | LED | |
Oscillation Indicator | Yellow (ready for laser oscillation), Red (laser beam emitted) | |
Assist gas switching | Oxygen(0.99MPa), Air(0.83MPa), 3rd assist gas(3.0MPa) | |
Assist gas pressure NC function control | Automatic | |
Mass (kg) | 24000kg(6.5m/3.0m) - 27000kg( 8m/4.5m) | |
Workpiece loading length (m) | STD: 2.5m to 6.5m/8.0m, OP:1.5m to 6.5m to 8.0m | |
Workpiece unloading length (m) | Short: MAX.0.7m. Long: 0.7m to 3.0m/4.5m | |
Laser Resonator Specifications | Laser type | Fiber laser |
Wave length | 1.08 μm | |
Continuous rated output | 3 kW | |
Output range | 150W to 3000W | |
Pulse mode | Normal pulse (NP) | |
Pulse frequency Pulse duty | 1 Hz to less than 1 kHz - 0 to 100% 1 kHz to 2 kHz - 20 to 100% | |
Output stability | +-1.0% | |
Chiller System | Indoor air cooling type | |
Reservoir | Fresh Water 60L, Pure water for optical system 10L | |
Control Specifications | Name | MAZAK FX (30i-L4) |
CPU | 64 bit | |
Input method | MDI key input or data input via USB memory device | |
Monitor | 15" color LCD | |
Control method | Semi-closed loop | |
Memory Capacity | 8 MB | |
Program Storage Capacity | 1000 programs | |
Programming method | EIA/ISO method | |
Program number | 4-digit number for program identification | |
Number of controlled Axes | 14-axis control(Laser machine) | |
Number of controlled Axes | 16-axis control(Loader/Unloader) | |
Minimum setting unit | 0.001 mm | |
Servo System | Digital | |
Position detector | Encoder | |
Input Interface | USB |